Tasmanian Tiger WPV Stuffbag 25 is a waterproof compression packing bag with a capacity of 25 liters, equipped with taped seams, a roll-up inlet closed with buckles and a compression valve to evacuate excess air. The product is made of durable 420DEN ECO Nylon with a PU and TPU coating, meets IP64 waterproof standards.
Tasmanian Tiger WPV Stuffbag 25 is a waterproof compression packing bag with a capacity of 25 liters, equipped with taped seams, a roll-up inlet closed with buckles and a compression valve to evacuate excess air. The product is made of durable 420DEN ECO Nylon with a PU and TPU coating, meets IP64 waterproof standards.
The waterproof WPV Stuffbag 25 from Tasmanian Tiger has the structure of a cylindrical bag with a stiffened and rolled inlet, secured with (two) 25 mm hermaphroditic buckles from Woojin Plastic (model: Dual Herma Champ). The buckles used allow you to fasten the inlet at the top of the bag using two identical connectors or on the sides of the bag using all four connectors. The bag has small panels on the side walls with laser-cut slots in the MOLLE system (1 column per side, 5 rows of straps each), integrated with the body by welding. An addition included with each panel is the hermaphroditic Dual Herma Champ buckle connector, which allows you to fasten the rolled inlet on the side sectors of the bag. The buckle connectors on the panels are anchored via a fixed strap with an adjuster (model: Smoothy Lock, patented by the Woojin Plastic brand), thanks to which we can freely change the position and at the same time the height of the side closure, reducing the capacity of the bag to our current preferences. Just above the bottom of the cargo chamber, there is a compression valve (model: Air Release Valve from the above-mentioned Woojin Plastic brand), allowing for pumping out excess air from inside the bag and reducing the unnecessary volume of the carried equipment). The product also has two additional D rings (model: Smoothy Hydee from Woojin Plastic), located next to the buckles at the inlet, allowing you to anchor additional equipment or attach the container to any space using any carabiner (cord, hook, strap, etc.). This bag has a maximum capacity of 25 liters and has taped seams on the entire surface of the body, which guarantees impermeability of liquids and dirt, and thanks to the use of fabric with a resistance of up to 10,000 millimeters of water column, we can be sure about the safety of the equipment carried, including even electronics sensitive to moisture. The bag meets the IP64 waterproof, splashproof and dustproof standards. The bag should not be fully immersed in liquids, as the roll closure does not guarantee 100% liquid impermeability, especially with a significant increase in external water pressure.
The product is made of durable 420 DEN ECO Nylon with a PU and TPU coating and Acetal.
NYLON 420D TPU ECO. Composition: 100% polyamide.
Nylon ECO is a durable polyamide fabric with a yarn thickness of 420 denier, which is waterproof thanks to a special PU and TPU coating, and is also suitable for waterproof welding. The finished PFC-free material is used to produce backpacks, bicycle bags and storage bags (PFC/PFAS are a group of persistent chemicals identified as bioaccumulative and toxic).
ACETAL. Composition: 100% acetal.
Acetal is a crystalline thermoplastic polymer material. Acetal is characterized by excellent tensile strength, stiffness, surface hardness and chemical resistance. Acetal is characterized by excellent bending memory and retaining properties under repeated loads. The normal temperature range for short-term use is -40°F to +270°F (-40°C to +132°C). Acetal is recommended for high-performance applications, and Tasmanian Tiger uses this material for backpack buckles. The physical properties remain unchanged over a wide range of temperatures, relative humidity and weather conditions.
Product features:
