Tasmanian Tiger Tac Pouch 7.1 Olive (7276.331) is an accessory pouch with 24 x 15 x 6 cm dimensions, a large opening and the MOLLE reverse system. The inside features MOLLE hook-and-loop, a mesh pocket and elastic loops.
The Tac Pouch 7.1 from Tasmanian Tiger is a large single-compartment pocket, 24 cm high, 15 cm wide and 6 cm profile. The "Clam Shell" construction, based on a two-way YKK® zipper, allows for complete opening of the container and easy access to its contents. On the front wall of the container there is a large, flat pocket closed with a zipper, on its surface there is a small area of soft Velcro, dedicated to a patch personalizing the pocket. Additionally, along the side edges of the front wall of the container, vertical webbing straps are placed, integrated with the pocket at points, thanks to which we obtain five anchoring positions for additional equipment on each side of the pocket.
Inside the main compartment, starting from the rear wall of the container, similarly to the front wall, there are two vertical webbing straps along the side walls, point-integrated with the rear wall, thanks to which we have six anchoring points for additional equipment on each side of the pocket. In addition to the above-mentioned rigid tapes, on the rear wall there are also six flexible grommets for installing equipment on each side in a three-row arrangement, two grommets per row. At the top of each belt, an additional loop is installed for hanging equipment. The entire central sector of the interior of the rear wall is covered with soft Velcro, allowing for any installation of equipment via hard Velcro (hook-and-loop). Moving to the front part of the pocket interior, we will see a large pocket made of a mesh-like material. A very important feature of this mesh pocket is the fact that it has two zippers and we have access to the contents of this pocket both from the top and bottom. There are two rows of elastic tape on the mesh pocket, creating two very large eyelets for each row.
The pocket attachment system is based on a MOLLE panel with two laminated straps with stiffened ends, enriched with handles to facilitate re-installation of the pouch. The straps used are characterized by lower friction and a lower material profile, which makes strapping the container much easier, without changing the effectiveness and stability of the installation.
Pocket Made of Cordura with a fiber thickness of 700 Den. Composition 100% polyamide.
CORDURA® with a fiber thickness of 700 den is a combination of high wear and tear resistance of the classic 1000 den fabric with the lightness of a fabric with a fiber thickness of 500 den. The material complies with Bundeswehr TL 8305-0278 standards and is characterized by long-term stability and high abrasion and tear resistance.
Features:
