Bayonet Storm MOLLE Reverse Belt is a professional, two-piece belt designed for carrying weapons, ammunition and tactical equipment. MOLLE hems allow for convenient attachment of equipment elements, and the stiffened design provides sufficient stiffness so that the belt does not bend even under significant weight.
A belt that is the sum of experience and extensive knowledge of us and the users of our belts, collected over 9 years. It is also a milestone in technological development at Bayonet company, thanks to the use of specialized machines for individual stitching.
The main, external belt, sewn from two layers of polyamide tape, 45 mm wide and 20 kN strong, is stiff, but not excessively so, it allows for a good fit to the figure of the person wearing the belt, and does not create a "steel hoop" feeling. The stiffness of the main belt allows the outer belt to be conveniently attached to the inner belt using Velcro®, even if the main belt is loaded with pouches and light equipment. Due to the lack of plastic stiffeners, the belt will never break or deform permanently.
On the outer side of the main belt, almost along its entire length, polyamide straps with a strength of 6kN in the PALS (Pouch Attachment Ladder System) system for the MOLLE (Modular Lightweight Load-bearing Equipment) system are sewn on. Unlike Cordura, polyamide tapes provide much greater durability and better resistance to abrasion, tearing and dirt. A specially prepared machine, sewing PALS tapes with very strong bolts, allows a single cell to be loaded with a weight of up to 20 kg. The flat and smooth 25 mm wide space between PALS cells facilitates convenient lacing of pouches and accessories. This is noticeably easier than in the case of flat laser cutouts made of Cordura.
The compression (wrapping) system of the adjustable end of the main belt takes up only a small space next to the AustriAlpin Cobra® D-Ring buckle. Thanks to this, PALS cells are available almost along the entire circumference of the belt. The Velcro-fastened holder holding the adjustable end of the belt is much more durable than the commonly used rubber loop. The holder also allows for much easier adjustment of the belt length than a rubber belt loop. Thanks to the possibility of detaching the holder from the belt, you can easily attach a pistol holster and other belt accessories.
VERY IMPORTANT! The webbing of the adjustable end of the belt is laced onto the buckle correctly, in accordance with the recommendations of the Cobra® buckle manufacturer. The waist adjustment range is 15 cm, please carefully measure your waist circumference before purchasing, the size should be selected according to the selected size range.
The inner belt is made of 38mm soft tape with Velcro sewn on the outside for use around the entire circumference. Placed through a simple frame and fastened with Velcro to allow for a slight tightening at the waist. It can be used as an autonomous trouser belt, but it will not replace a good belt with a Cobra buckle.
The Bayonet Storm belt in the Reverse version, has the main belt is lined with hard Velcro with hooks on the inside around the entire circumference. The inner belt, which is inserted into the belt loops of the trousers, is trimmed with soft Velcro around the entire circumference.
Product features:
Outer main belt:
- 45mm wide, stiff, sewn with two layers of thick tape around the entire circumference except for the section to adjust the waist circumference, without plastic stiffeners
- fastened with AustriAlpin Cobra® PRO STYLE D-RING 18kN buckle, all black, matte, D-Ring matte black, black buckle opening eyes
- hard Velcro® Velcro (hooks) sewn on the outside, around the entire circumference, with a durability of 10,000 connections*
- PALS tapes for the MOLLE system made of polyamide tape with a strength of 6kN are sewn on the outside
- tested strength of a single PALS cell 20kg
- adjustable end of the belt wrapped and held by a Velcro® holder
- waist circumference adjustment 15 cm for each size, please adjust your waist circumference to the given sizes
The inner belt is inserted into the belt loops:
- made of soft, comfortable 38mm tape
- lined on the inside with soft Velcro® (loops) with a durability of 10,000 connections*
- plastic frame that allows you to quick tighten the belt
- fastened with Velcro
- hard Velcro is available at the folded end of the belt
Belt sizes:
- S – 75-90cm
- M – 85-100cm
- L – 95-110cm
- XL – 105-120cm
- XXL 115-130cm
Important safety note
Despite the use of specialized sewing, the best threads on the market with certified durability, a certified buckle and a certified tape, it is prohibited to use the belt for safety and rescue purposes. No tests have been performed on the belt to allow for the issuance of a "CE" safety certificate. This is primarily due to the requirements of the PL-EN 358:2002 standard Individual protective equipment to establish working position and prevent falls from height, that the belts be at least 8 cm wide along the entire length or 10 cm in the lumbar section, which automatically excludes the use of such a belt with trousers and carrying holsters and pouches.
Usage notes
The belt can be washed by hand or in a washing machine, in a delicate liquid, at a temperature of 40 degrees. C, no spinning, no softeners. Dry flat in a lying position, in a ventilated room, at room temperature. Do not dry in the sun or in an automatic dryer. IMPORTANT! hard Velcro (hooks) may damage clothes washed together with the belt, Velcro hooks should be completely covered with soft Velcro during washing. The metal buckle may damage the drum and other elements inside the washing machine, it should be secured with soft items of clothing. Hard Velcro (hooks) should be cleaned of threads and hair from time to time to maintain its bonding properties; the service life declared by the manufacturer does not take into account dirt and damage resulting from normal use.
The aesthetics of buckles
Buckles are tools and are shipped from the factory in bulk packaging without protection. There may be minimal coloring flaws, slight scratches or micro-dents. We eliminate major defects by returning the buckles to the factory. We strive to ensure that the belts are of the highest quality also in terms of aesthetics.
*Cycle LifeEN-1414: 50% of the minimum performance 10,000 cycles - Tested with VELCRO® Brand Loop E001 & Hook E088
